new file: io.c

-creation of io file
modified:   main.c
	-moving io setup to io.c
new file:   pinport.h
	-creation of pinport file, intended to be avr specific code from macro.h

firmware/source/io.c

@@ -0,0 +1,30 @@
+
+#include <avr/io.h>
+#include "pinport.h"
+
+//Goal is to silience everything
+//Clear busses and pull up when able
+void io_init()
+{
+	//pull up data bus
+	DATA_IP();
+	DATA_HI();
+
+	//pull up addr[7:0] bus
+	ADDR_IP();
+	ADDR_HI();
+
+	//EXP0 input no pullup
+	//SNES /RESET pin disables SRAM on first few pcb versions
+	//NES PRG-ROM /OE on old INL-ROM v1 boards w/pulldown
+	//NED PRG-ROM /WE on INL-ROM v3 boards w/pullup
+	//NES CPLD JTAG TDO non-5v tolerant
+	EXP0_IP();
+	EXP0_LO();
+
+	//IRQ pullup NES boards will drive this pin
+	IRQ_IP();
+	IRQ_HI();
+
+	//LED LAST displaying complete..
+}

firmware/source/main.c

@@ -124,10 +124,13 @@ int main()
 
 	usbDeviceConnect();
 
+	//intialize i/o to default state
+	io_init();
+
 	//configure LED PORT/DDR
-	SETUP_LED();
+	//SETUP_LED();
 	//Always startup with LED ON
-	LED_ON();
+	//LED_ON();
         
 	//enable interrupts
 	sei();

firmware/source/pinport.h

@@ -0,0 +1,154 @@
+#include <avr/io.h>
+
+//#define NOP() do { __asm__ __volatile__ ("nop"); } while (0)
+// used for a very short delay 
+
+#define LO 0x00
+#define HI 0xFF
+
+//#define TRUE 0x00
+//FALSE is ANYTHING but TRUE, the value signifies the error number
+
+//PIN DEFINITIONS
+//AUX PORTD
+#define EXP0	PD0	//RESET_n on SNES
+#define LED	PD1
+#define EXP9	PD1	//dual purposed pin
+#define USBP	PD2
+#define IRQ	PD3
+#define USBM	PD4
+#define CIA10	PD5
+#define BL	PD6
+#define XOE	PD7	//Only X_OE on purple and green boards
+//X_OE and X_CLK on yellow final boards
+
+//CTL PORTC
+#define M2	PC0
+#define PCE	PC1	//SNES /ROMSEL
+#define PRW	PC2
+#define AXL	PC3	//Free on green and yellow boards
+//Also AXL /OE on Yellow boards
+#define CRD	PC4	//SNES /RD
+#define CWR	PC5	//SNES /WR
+#define CICE 	PC6
+#define AHL	PC7	//Also AXL on green proto boards
+
+//PORT DEFINITIONS
+#define ADDR_OUT	PORTA
+#define ADDR_IN		PINA
+#define ADDR_DDR	DDRA
+
+#define DATA_OUT	PORTB
+#define DATA_IN		PINB
+#define DATA_DDR	DDRB
+
+//#define	UP_ADDR		PORTB
+//second revision moves this to PORTA and combines AXL/AHL
+//#define	X_ADDR		PORTB	
+
+#define CTL_OUT		PORTC
+#define CTL_IN		PINC
+#define CTL_DDR		DDRC
+
+#define	AUX_OUT		PORTD
+#define AUX_IN		PIND
+#define AUX_DDR		DDRD
+
+#define DATA_IP()	DATA_DDR =  LO
+#define DATA_OP()	DATA_DDR =  HI
+#define DATA_HI()	DATA_OUT =  HI
+#define DATA_LO()	DATA_OUT =  LO
+
+#define ADDR_IP()	ADDR_DDR  =  LO
+#define ADDR_OP()	ADDR_DDR  =  HI
+#define ADDR_HI()	ADDR_OUT =  HI
+#define ADDR_LO()	ADDR_OUT =  LO
+
+
+//	//AHL, AXL, are always output and high, unless individually asserted.
+//	#define CTL_IP()	CTL_DDR = 0b10001000// &=  ((1<<AHL) | (1<<AXL))
+//	#define CTL_OP()	CTL_DDR = 0b10111111 //&= ~(1<<CICE); CTL_DDR  |=  ~((1<<AHL) | (1<<AXL) | (1<<CICE)) //CIRAM /CE is always input
+//	#define CTL_HI()	CTL_OUT  |=  ~((1<<AHL) | (1<<AXL))
+//	//maintain these high unless individually asserted
+//	#define CTL_LO()	CTL_OUT  &=  ((1<<AHL) | (1<<AXL))
+//	
+//	//LED and XOE are separately asserted due to always outputs
+//	#define AUX_IP()	AUX_DDR  &=  ((1<<USBP) | (1<<USBM) | (1<<LED) | (1<<XOE))
+//	//#define AUX_OP()	AUX_DDR  |=  ~((1<<USBP) | (1<<USBM) | (1<<LED) | (1<<XOE))
+//	#define AUX_HI()	AUX_OUT  |=  ~((1<<USBP) | (1<<USBM) | (1<<LED) | (1<<XOE))
+//	#define AUX_LO()	AUX_OUT  &=  ((1<<USBP) | (1<<USBM) | (1<<LED) | (1<<XOE))
+//	
+//	//SNES copy cart needs CIRAM A10 and CIRAM /CE to be outputs
+//	#define CC_OP()		AUX_DDR |= (1<<CIA10); CTL_DDR |= (1<<CICE)
+//	#define CC_IP()		AUX_DDR &= ~(1<<CIA10); CTL_DDR &= ~(1<<CICE)
+
+#define	SETUP_LED()	AUX_DDR	|=  (1<<LED)
+#define LED_ON()	AUX_OUT |=  (1<<LED)
+#define LED_OFF()	AUX_OUT &= ~(1<<LED)
+
+#define SETUP_ADDR_X()		AUX_DDR |=  (1<<XOE)
+#define	DISABLE_ADDR_X()	AUX_OUT |=  (1<<XOE)
+#define	ENABLE_ADDR_X()		AUX_OUT &= ~(1<<XOE)
+
+#define SETUP_AHL()	CTL_DDR |=  (1<<AHL); CTL_OUT |= (1<<AHL)	//output high
+#define SETUP_AXL()	CTL_DDR |=  (1<<AXL); CTL_OUT |= (1<<AXL)	//output high
+#define LATCH_AHL()	CTL_OUT  &= ~(1<<AHL); CTL_OUT |= (1<<AHL)	//toggle low -> high
+#define LATCH_AXL()	CTL_OUT  &= ~(1<<AXL); CTL_OUT |= (1<<AXL)	//toggle low -> high
+
+#define	M2_IP()		CTL_DDR	&=  ~(1<<M2)
+#define	M2_OP()		CTL_DDR	|=  (1<<M2)
+#define M2_HI()		CTL_OUT |=  (1<<M2)
+#define M2_LO()		CTL_OUT &=  ~(1<<M2)
+#define CYCLE()		CTL_OUT |= (1<<M2); NOP(); NOP(); NOP();    CTL_OUT &=  ~(1<<M2); NOP(); NOP(); NOP();    CTL_OUT |= (1<<PCE)	//toggle M2 high -> low for CPU access cycle, and takes PRG /CE high if it was low
+
+#define PCE_HI()		CTL_OUT |=  (1<<PCE)
+#define PCE_LO()		CTL_OUT &=  ~(1<<PCE)
+
+#define CICE_HI()		CTL_OUT |=  (1<<CICE)
+#define CICE_LO()		CTL_OUT &=  ~(1<<CICE)
+
+#define PRG_RD()	CTL_OUT |=  (1<<PRW)
+#define PRG_WR()	CTL_OUT &=  ~(1<<PRW)
+
+//	#define PRG_RD_PCE_HI()	CTL_OUT |=  (1<<PRW) | (1<<PCE)
+//	#define PRG_WR_PCE_LO()	CTL_OUT &=  ~((1<<PRW) | (1<<PCE))
+//	
+//	//#define SNES_RD_SEL_HI()	CTL_OUT |=  (1<<CRD) | (1<<PCE)
+//	#define SNES_WR_SEL_LO()	CTL_OUT &=  ~((1<<CWR) | (1<<PCE))
+//	#define SNES_RD_SEL_LO()	CTL_OUT &=  ~((1<<CRD) | (1<<PCE))
+//	#define SNES_CTL_HI()		CTL_OUT |=  (1<<CWR) | (1<<CRD) | (1<<PCE)
+//	#define CC_CTL_HI()		CTL_OUT |=  (1<<PRW) | (1<<CICE); AUX_OUT |= (1<<CIA10)
+//	//#define SNES_CTL_LO()		CTL_OUT &=  ~((1<<CWR) | (1<<CRD) | (1<<PCE))
+//	
+//	#define CHR_OEN()	CTL_OUT |=  (1<<CRD)
+//	#define CHR_OE()	CTL_OUT &=  ~(1<<CRD)
+//	#define CHR_WEN()	CTL_OUT |=  (1<<CWR)	//Not-able  (high)
+//	#define CHR_WE()	CTL_OUT &=  ~(1<<CWR)	//Enabled   (low)
+//	
+//	#define CC_OEN()	AUX_OUT |=  (1<<CIA10)
+//	#define CC_OE()		AUX_OUT &=  ~(1<<CIA10)
+//	#define CC_WEN()	CTL_OUT |=  (1<<PRW)	//Not-able  (high)
+//	#define CC_WE()		CTL_OUT &=  ~(1<<PRW)	//Enabled   (low)
+//	
+//	#define CHR_RD()	CHR_WEN(); CHR_OE(); 
+//	#define CHR_WR()	CHR_OEN(); CHR_WE(); 	// /OE-hi /WE-lo
+//	
+//				// /WE-hi    /OE-lo
+//				// PRG RW hi, CIRAMA10 lo
+//	#define CC_RD()		CC_WEN(); CC_OE(); 
+//	#define CC_WR()		CC_OEN(); CC_WE(); 	
+//				//CIRAM A10 hi, PRGRW lo
+//				// /OE-hi    /WE-lo
+
+//EXP0 to only be pulled high because XO boards don't level shift EXP0
+//EXP0_LO(); replace with EXP0_LO(); EXP0_OP();
+//EXP0_HI(); replace with EXP0_IP(); EXP0_HI();
+#define	EXP0_IP()	AUX_DDR	&=  ~(1<<EXP0)
+#define	EXP0_OP()	AUX_DDR	|=  (1<<EXP0)
+#define EXP0_HIGH()	AUX_OUT |=  (1<<EXP0)
+#define EXP0_LOW()	AUX_OUT &=  ~(1<<EXP0)
+#define EXP0_HI()	EXP0_IP(); EXP0_HIGH(); NOP(); NOP(); NOP(); NOP();
+#define EXP0_LO()	EXP0_LOW(); EXP0_OP();
+
+#define PU_CICE()	CTL_DDR &= ~(1<<CICE); CTL_OUT |= (1<<CICE);
+