From 8af93d551588e56c0fdc69ee41835a57c8eb9751 Mon Sep 17 00:00:00 2001 From: Paul XPS Date: Fri, 21 Jun 2019 20:19:43 -0500 Subject: [PATCH] adding Readme notes for PCB v2.1 --- Readme.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Readme.txt b/Readme.txt index b0782b6..bb3584e 100644 --- a/Readme.txt +++ b/Readme.txt @@ -170,6 +170,19 @@ purchased it. It might help to have a freind plug in the USB cable while you short the pins. Once it's plugged in you don't have to keep the pins shorted anymore. +-PCB VERSION 2.1 released Feb 2019 + This PCB version replaced the BL/RUN slide/toggle switch with a + momentary button. It's otherwise similar to v2.0 above. This + version also started coming with a 3D printed chipset enclosure + by default. The bootloader (BL) switch is closest to the edge + of the PCB, and the 3D printed button is recessed. The Reset + switch is closer to the center of the PCB and is not recessed. + To enter bootloader mode, hold the BL switch while plugging in + the USB cable. You can release the BL button after the device + is recognized by your PC. You can tap the reset button to exit + bootloader mode. Effectively the position of the BL switch only + matters when the device powers up, or boots from reset. + -PCB VERSION 2.0N smaller device with NES Connector alone These are the majority of the basic NESmaker kickstarter kits. You really shouldn't be going through this process unless you