CHR-ROM dumping working for NROM checksum appears to be off need to compare files.

firmware/source/dump.c

@@ -24,8 +24,8 @@ uint8_t dump_page( buffer *buff ) {
 								buff->last_idx, ~FALSE );
 			break;
 		case CHRROM:		//$0000
-			//buff->cur_byte = nes_ppu_page_rd( buff->data, addrH, buff->id,
-			//					(buff->last_idx | buff->id) );
+			buff->cur_byte = nes_ppu_page_rd_poll( buff->data, addrH, buff->id,
+								buff->last_idx, ~FALSE );
 			break;
 		case PRGRAM:
 			addrH |= 0x60;	//$6000

firmware/source/nes.c

@@ -442,3 +442,51 @@ uint8_t nes_cpu_page_rd_poll( uint8_t *data, uint8_t addrH, uint8_t first, uint8
 	//return index of last byte read
 	return i;
 }
+
+/* Desc:NES PPU Page Read with optional USB polling
+ * 	decode A13 from addrH to set /A13 as expected
+ *	if poll is true calls usbdrv.h usbPoll fuction
+ *	this is needed to keep from timing out when double buffering usb data
+ * Pre: nes_init() setup of io pins
+ *	num_bytes can't exceed 256B page boundary
+ * Post:address left on bus
+ * 	data bus left clear
+ *	data buffer filled starting at first for len number of bytes
+ * Rtn:	Index of last byte read
+ */
+uint8_t nes_ppu_page_rd_poll( uint8_t *data, uint8_t addrH, uint8_t first, uint8_t len, uint8_t poll )
+{
+	uint8_t i;
+
+	if (addrH < 0x20) { //below $2000 A13 clear, /A13 set
+		_ADDRH_SET(addrH | PPU_A13N);
+	} else { //above PPU $1FFF, A13 set, /A13 clear 
+		_ADDRH_SET(addrH);
+	}
+
+	//set CHR /RD and /WR
+	_CSRD_LO();
+
+	//set lower address bits
+	ADDR_OUT = first;	//doing this prior to entry and right after latching
+				//gives longest delay between address out and latching data
+	for( i=0; i<=len; i++ ) {
+		//couple more NOP's waiting for data
+		if ( poll == FALSE ) {
+			NOP();	//one prob good enough considering the if/else
+			NOP();
+		} else {
+			usbPoll();
+		}
+		//latch data
+		data[i] = DATA_IN;
+		//set lower address bits
+		ADDR_OUT = ++first;
+	}
+
+	//return bus to default
+	_CSRD_HI();
+	
+	//return index of last byte read
+	return i;
+}

firmware/source/temp

@@ -0,0 +1,20 @@
+AVR Memory Usage
+----------------
+Device: atmega164a
+
+Program:    5486 bytes (33.5% Full)
+(.text + .data + .bootloader)
+
+Data:        653 bytes (63.8% Full)
+(.data + .bss + .noinit)
+
+AVR Memory Usage
+----------------
+Device: atmega164a
+
+Program:    5498 bytes (33.6% Full)
+(.text + .data + .bootloader)
+
+Data:        653 bytes (63.8% Full)
+(.data + .bss + .noinit)
+

host/source/dump.c

@@ -114,8 +114,28 @@ int dump_cart( USBtransfer* transfer, rom_image *rom, cartridge *cart )
 
 
 	//tell buffer manager when to stop
+	// or not..?  just reset buffers and start next memory or quit
 	//reset buffers and setup to dump CHR-ROM
 
+	check(! reset_buffers( transfer ), "Unable to reset device buffers");
+	check(! allocate_buffers( transfer, num_buffers, buff_size ), "Unable to allocate buffers");
+	check(! set_mem_n_part( transfer, buff0, CHRROM, MASKROM ), "Unable to set mem_type and part");
+	check(! set_mem_n_part( transfer, buff1, CHRROM, MASKROM ), "Unable to set mem_type and part");
+	check(! set_map_n_mapvar( transfer, buff0, NROM, NILL ), "Unable to set mapper and map_var");
+	check(! set_map_n_mapvar( transfer, buff1, NROM, NILL ), "Unable to set mapper and map_var");
+
+	debug("\n\nsetting operation STARTDUMP");
+	check(! set_buff_operation( transfer, STARTDUMP ), "Unable to set buffer operation");
+
+	for( i=0; i<(8*KByte/buff_size); i++) {
+		//payload transfer in and append to file
+		if ( i % 256 == 0 ) debug("payload in #%d", i);
+		check(! payload_in( transfer, data, buff_size ), "Error with payload IN");
+		if (i==0) printf("first byte: %x\n", data[0]);
+		check(! append_to_file( rom, data, buff_size ), "Error with file append");
+	}
+	debug("payload done");
+
 	//close file in main
 
 	//reset io at end

host/source/temp

@@ -0,0 +1,20 @@
+AVR Memory Usage
+----------------
+Device: atmega164a
+
+Program:    5486 bytes (33.5% Full)
+(.text + .data + .bootloader)
+
+Data:        653 bytes (63.8% Full)
+(.data + .bss + .noinit)
+
+AVR Memory Usage
+----------------
+Device: atmega164a
+
+Program:    5498 bytes (33.6% Full)
+(.text + .data + .bootloader)
+
+Data:        653 bytes (63.8% Full)
+(.data + .bss + .noinit)
+