Updating fwupdate script it's officially updating the STM32 firmware all
on it's own!!! It flashes pretty quickly too. The STlink takes about 8sec to erase and write. I'm guessing it's erasing the whole 128KByte though. My own fwupdater takes ~3sec to flash, ~1.5sec to erase. So there might not even be that much room for speed up. 3sec is hard to beat signficantly anyway and it comes at the cost of bytes. Perhaps even complexity and risk of OUT packet errors/loss on the device side. So kinda like leaving it as is.
This commit is contained in:
Paul XPS
parent
e3efe04836
commit
ff8495455c
|
|
@ -24,12 +24,14 @@ local function erase_main()
|
|||
print("flash addr:", string.format("%X", rv) )
|
||||
|
||||
while (curpage<32) do
|
||||
-- while (curpage<128) do
|
||||
print("erasing page:", curpage)
|
||||
-- while (curpage<128) do --RB has 128KB but last 96KB isn't used (yet)
|
||||
if(curpage%4 ==0) then
|
||||
print("erasing page:", curpage)
|
||||
end
|
||||
dict.fwupdate("ERASE_1KB_PAGE", curpage)
|
||||
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
--rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
--print("flash addr:", string.format("%X", rv) )
|
||||
|
||||
curpage = curpage+1
|
||||
end
|
||||
|
|
@ -40,107 +42,152 @@ local function update_firmware(newbuild)
|
|||
|
||||
print("updating")
|
||||
|
||||
--open new file first, don't bother continuing if can't find it.
|
||||
file = assert(io.open(newbuild, "rb"))
|
||||
|
||||
--TODO verify the first 2KByte match, don't continue if not..
|
||||
|
||||
--enter fwupdate mode
|
||||
dict.bootload("PREP_FWUPDATE")
|
||||
|
||||
--now the device will only respond to FWUPDATE dictionary commands
|
||||
|
||||
--open new file
|
||||
file = assert(io.open(newbuild, "rb"))
|
||||
|
||||
--TODO verify first 2KByte matches build
|
||||
|
||||
--erase 30KByte of application code
|
||||
-- erase_main()
|
||||
erase_main()
|
||||
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
|
||||
--advance past the first 2KB of build
|
||||
dict.fwupdate("ERASE_1KB_PAGE", 30)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
--Set FLASH->AR to beginging of application section
|
||||
--this can be done be re-erasing it..
|
||||
--maybe we could have skipped page 2 in erase_main
|
||||
--or have erase_main count down..
|
||||
dict.fwupdate("ERASE_1KB_PAGE", 2)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
|
||||
dict.fwupdate("SET_FLASH_ADDR", 0x7912, 0x01)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
--advance the file past first 2KByte
|
||||
local buffsize = 1
|
||||
local byte, data
|
||||
local byte_num = 0
|
||||
for byte in file:lines(buffsize) do
|
||||
data = string.unpack("B", byte, 1)
|
||||
--print(string.format("%X", data))
|
||||
byte_num = byte_num + 1
|
||||
if byte_num == 2048 then break end
|
||||
end
|
||||
|
||||
-- dict.fwupdate("UNLOCK_FLASH")
|
||||
local offset = 0
|
||||
local readdata
|
||||
local data_l
|
||||
buffsize = 1 --2 bytes at a time
|
||||
print("Writting half word at at time, but it's not much data..")
|
||||
while byte_num < (32*1024) do
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0xCC33, 0x00)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
print("\n");
|
||||
--read next byte from the file and convert to binary
|
||||
--gotta be a better way to read a half word (16bits) at a time but don't care right now...
|
||||
byte_str = file:read(buffsize)
|
||||
if byte_str then
|
||||
data_l = string.unpack("B", byte_str, 1)
|
||||
else
|
||||
--should only have to make this check for lower byte
|
||||
--binary file should be even
|
||||
print("end of file")
|
||||
break
|
||||
end
|
||||
byte_str = file:read(buffsize)
|
||||
data = string.unpack("B", byte_str, 1)
|
||||
data = (data<<8)+data_l
|
||||
-- print("writting:", string.format("%X", data), "addr:", string.format("%X", byte_num))
|
||||
|
||||
if( (byte_num % (4*1024)) == 0 ) then
|
||||
print("flashing KB", byte_num/1024)
|
||||
end
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0x1111, 0x01)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
--write the data
|
||||
dict.fwupdate("WR_HWORD", data, offset)
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0x2222, 0x01)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
-- if (verify) then
|
||||
-- readdata = dict.fwupdate("READ_FLASH", byte_num, 0x00)
|
||||
-- print("read data:", string.format("%X", rv) )
|
||||
-- if readdata ~= data then
|
||||
-- print("ERROR flashing byte number", byte_num, " to flash ", data, readdata)
|
||||
-- end
|
||||
-- end
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0x4444, 0x02)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
offset = 1 --this is zero for first byte, but one for all others..
|
||||
byte_num = byte_num + 2
|
||||
end
|
||||
--]]
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0x7777, 0x03)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
-- dict.fwupdate("WR_HWORD", 0xCC33, 0x00)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
-- print("\n");
|
||||
--
|
||||
-- dict.fwupdate("WR_HWORD", 0x1111, 0x01)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
--
|
||||
-- dict.fwupdate("WR_HWORD", 0x2222, 0x01)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
--
|
||||
-- dict.fwupdate("WR_HWORD", 0x4444, 0x02)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
--
|
||||
-- dict.fwupdate("WR_HWORD", 0x7777, 0x03)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
--
|
||||
-- dict.fwupdate("WR_HWORD", 0xAAAA, 0x10)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
--
|
||||
-- dict.fwupdate("WR_HWORD", 0xBBBB, 0x20)
|
||||
-- rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
-- print("flash addr:", string.format("%X", rv) )
|
||||
-- rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
-- print("flash data:", string.format("%X", rv) )
|
||||
-- print("\n");
|
||||
--
|
||||
---- dict.fwupdate("LOCK_FLASH")
|
||||
--
|
||||
-- rv = dict.fwupdate("READ_FLASH", 0x0000, 0x00)
|
||||
-- print("read data:", string.format("%X", rv) )
|
||||
--
|
||||
-- rv = dict.fwupdate("READ_FLASH", 0x053e, 0x00)
|
||||
-- print("read data:", string.format("%X", rv) )
|
||||
--
|
||||
-- rv = dict.fwupdate("READ_FLASH", 0x791a, 0x00)
|
||||
-- print("read data:", string.format("%X", rv) )
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0xAAAA, 0x10)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
|
||||
dict.fwupdate("WR_HWORD", 0xBBBB, 0x20)
|
||||
rv = dict.fwupdate("GET_FLASH_ADDR")
|
||||
print("flash addr:", string.format("%X", rv) )
|
||||
rv = dict.fwupdate("GET_FLASH_DATA")
|
||||
print("flash data:", string.format("%X", rv) )
|
||||
print("\n");
|
||||
|
||||
-- dict.fwupdate("LOCK_FLASH")
|
||||
|
||||
rv = dict.fwupdate("READ_FLASH", 0x0000, 0x00)
|
||||
print("read data:", string.format("%X", rv) )
|
||||
|
||||
rv = dict.fwupdate("READ_FLASH", 0x053e, 0x00)
|
||||
print("read data:", string.format("%X", rv) )
|
||||
|
||||
rv = dict.fwupdate("READ_FLASH", 0x791a, 0x00)
|
||||
print("read data:", string.format("%X", rv) )
|
||||
--close file
|
||||
assert(file:close())
|
||||
print("\n\n DONE updating flash. \n\n Reseting device \n\n IGNORE the error that comes next.. \n\n")
|
||||
|
||||
dict.fwupdate("RESET_DEVICE")
|
||||
|
||||
--write build to flash
|
||||
|
||||
print("updated")
|
||||
print("updated") --this doesn't print because reset errored us out..
|
||||
end
|
||||
|
||||
-- global variables so other modules can use them
|
||||
|
|
|
|||
Loading…
Reference in New Issue