boards for SF2 builds. Not necessarily the most clean, but it was
stable and worked well.
Need to get swim comms working on other board designs.
Need to come up with better swim activation with more exact timing.
Still need to implement swim comms on avr, hopefully that doesn't prove
to be too much of a PITA... Not looking forward to that. Can probably
only handle low speed, and faking pullup may not work as well without
time on it's side @ 16Mhz...
Need to get stm32 up and working, currently the usbFunctionWrite causes
device descriptor request to fail on stm32 devices. So need to do some
debugging there which I was expecting..
enumeration with host, no vendor/class requests handled.
move avr builds into avr_release dir
move original source files into source/old for future reference.
avr-size avr_kazzo.elf
text data bss dec hex filename
1496 2 43 1541 605 avr_kazzo.elf
Need to verify page programmed successfully as it currently just continues even if unable to
flash proper data. Need to make write page utilize variables for bank address based on mapper
and/or memory as currently doesn't flash CHR-ROM due to $5555 $2AAA being above address space
of CHR-ROM
buffer opcode updates to transfer payloads
including stuffing two bytes of write transfers in setup packet.
Calling specific buffers with miscdata or opcode.
new dump and flash modules for firmware.
new buffer function update_buffers called during main to monitor and
manage buffer objects when not being loaded/unloaded from USB.
Paul blue asus