this is the verion getting flashed on all v2.0N NESmaker kits
v2.3.0 worked for basic functions, but was never shipped
Majority of effort revolved around testing mapper30 boards with the
smaller v2.0N INLretro with the NES connector alone for NESmaker kits.
added linear feedback shift register for test stream data generated
locally on the device. I'm not 100% sure if this is any faster than
pushing the actual data via USB though.. :/ It's plenty fast on the
stm32 nearly instantaneous for 32KByte. But the AVR takes a couple
sec..
Created "stuff" dictionary for things like that were I just want to add
small things and don't want to bother with a whole new dictionary.
Added file verification to the host with files.lua
Have some nes flash algos return post-written data so calling function
can decide if want to retry, fail, etc.
Changed host dictionary calls to assert instead of error because it
really shouldn't continue. I didn't see an error when sending opcode to
wrong dict and caused head banging..
fwupdate permits bytes to be skipped, or force the update. Found that
the fwupdater got assigned different addresses of ram depending on what
all other ram gets allocated to the main application
Some clean up of inlretro.lua
TODO:
host learn and keep track of the connected device.
Needed for ciccom right now, or knowing whether ciccom connection
is even present..
In the end maybe ciccom is better placed in firmware, but for small
transfers of only a few bytes it kinda makes sense to keep on the host.
Pinport gets quite messy with these made up pin names when really all I
want to do is toggle a specific pin on the NES connector. So maybe some
double mappings would actually be okay, need to rethink that..
create different flash modes that either keep going, retry, or error
depending on the goal of the flash operation. Fanout the return value
from flash algos to all of them.
have fwupdate assigned a specific area of ram so the ram pointer doesn't
change between builds. Okay to ignore for now.
Realized can have STM32F070C6 devices execute bootloader by erasing all
the flash or perhaps even just the first word of flash according at
AN2606. This wouldn't work for RB devices though. This could be done
through the bootloader dict
Have basic testing complete of erasing application/main code, flashing
data, and reading it back for verification.
This ended up being pretty big task to get working. Some previous
efforts helped out quite a bit though. The first thing needed was a
path out of the main application and this was done in bootload.c by
calling PREP_FWUPDATE. That jumps to the fwupdate area (first 2KByte)
of flash.
There the 'fwupate main' takes over. It updates the usbFunction
Setup/Write ram function pointers to fwupdate's own setup function.
Then it must hijack the processor's execution so once the PREP_UPDATE
exception is complete the processor returns to the fwupdater instead of
the main. This is done by snooping back through the stack and finding
the stack frame keying off of xPSR and valid PC address. It then stomps
the PC & LR in the stack frame to steal execution from the main thread.
After that, all usb transfers are handled by the fwupdater.
Able to get buy without the write so far since setup packets provide
data but are also IN transfers to give path for sending data back to
host. So to keep things small and simple this is all that's handled so
far. Once I get tired of it being so slow I can implement the
usbFunctionWrite and speed things up quite a bit. Haven't actually
timed it yet, but for only 20KByte of data it and not being very
frequent it shouldn't be a big deal. The more I say this the more I'm
thinking I'll add that next because I'll be using it myself so much for
development.. Less time in that state is less likely for ppl to
'semi-brick' their device.
There is of course always the stmicro dfuse demo that can always unbrick
the device. I tried really hard to jump to their bootloader but no
matter what I did I couldn't get it working. It was never recognized by
USB. I half way wonder now if I needed to disable the bootpin which I
never would want to do anyway..
Created separate build_stm folders for INL6 & INL_NES which is what all
the NESmaker kits use. Also update the make files to be more accurate
about what chip their using since fwupdate tries to prevent a hardfault
from flash access beyond what's available.
This update doesn't include a means of updating the first 2KByte of
firmware updater space itself. But the application code should be able
to take care of that for us in a future update. It's only 2KByte so
just temporarily storing the fresh build in SRAM will probably work.
Although will have to be careful about any calls from application code
to fwupdater. Plus there's always dfuse..
Other problem I ran into was erasing the application code. It worked
fine early on for all 30KByte. But as my fwupdater function grew it
crashed when page 18 was erased. Realized my bigger switch/case
statement was calling a gcc library function that resided in the
application code. It was only 50Bytes, so moved it to fwupdate section.
Brought 2 of similar library functions over as well, but one of them
disappeared with update to latest version of arm-none-eabi-gcc.
Not a commit really, but this is the release where I updated gcc. Was
previously:
gcc version 6.2.1 20161205 (release)
[ARM/embedded-6-branch revision 243739]
is now:
gcc version 7.3.1 20180622 (release) [ARM/embedded-7-branch revision
261907] (GNU Tools for Arm Embedded Processors 7-2018-q2-update)
Updating gcc provided a smaller build size of ~250 Bytes from the tail
end. But it also freed up ~50Bytes in fwupdate space as well.
I made a commit earlier this week but messed things up by not pulling
from the master and things weren't updated... Here's the notes from
that commit:
Author: Paul XPS <paul@infiniteneslives.com>
Date: Tue Nov 6 22:45:52 2018 -0600
Large commit biggest feature add is NES MMC3 support including Save RAM
(aka WRAM/PRGRAM) support including dumping and writing save files.
The MMC3 script & method of dumping/flashing is the most forward
thinking script/firmware so far. Finally starting to form a clear
vision of how I want to handle flashing/dumping variations with mappers.
Biggest thing is having the host handle the mapper init & banking
control. In the view of the firmware, it's only responsible for knowing
how to flash a bank. And dumping is even more generic with the host
just telling what address range to read. Things will get more complex
with support of mappers with bus conflicts. But ready to start
converting these old hacked methods to be more like the MMC3 means.
Have some early support for dumping gameboy using the snes script as the
pinouts are nearly identical. Along with testing of toggling between 3v
GBA and 5v DMG.
Have some early support for INLretro NES only version which uses a
smaller mcu because it doesn't need to support large 16bit carts. Still
have to get this completed.
Added support for CNROM, but I'm not sure if it's actually working. Going
to restart with NROM and start updating the currently supported
mappers to be more like MMC3.
But this also includes some new updates from the second half of the week:
Started updating existing NES scripts to use new MMC3 methodology. Got
NROM, CNROM, BNROM, & Color Dreams working. On the host side only
needed to add nes.c functions for specific flash algos. Able to delete
significant amounts of mapper specific code from flash.c
Got some basic SNES script support with new methodology for Catskull
elect 5v PLCC SNES LoROM board. And INL SNES HI/LO-ROM 3v board as
well. These don't yet use buffer writes, just single byte writes.
Also having issues with Mirroring test/sensing again. Driving me crazy,
but don't really care about it at the moment and not sure what's wrong..
So just committing that broken for now. Looking to remove this
functionality from the firmware side as the host should be controlling
most of this.
Looking to add SNES RAM & buffered writes. Also need to test some of
the HIROM code as I just added it in there while I did the LOROM stuff..
Paul XPS