battery ram save dumping, and flash board programming.
-MMC5 updates fixed battery ram dumping
-genesis_v2.lua script supports dumping battery ram, and flashing ROM
only prototype flash board. The firmware isn't very clean, but working
for now.
-SNES support for 32Byte page writes, but host lua scripts are a bit of
a mess and still need committed. Firmware isn't very clean either but
it's working..
-SEGA stuff is early and non-working. Got it working in a separate
branch which will commit shortly.
-SWIM updates for better erasing, flashing, and dumping routines
-FILES updates for jtag and some other niceties
-JTAG is working now for LC4032V & Mach-XO 256
Firmware application version #3 release
-------------------------------------------
N64 updates:
Some extra timing delays were necessary for consistent dumping.
Includes fixes for N64 dumping that proved working for me on 10+ carts I
dumped successfully. There is now a .csv in docs folder with cart size
in bytes, divide that number by 131,072 to get size in mbits for -z
flag. Includes CRC32 checksum that can be verified using HxD hex
editor. N64 file output is big-endian so it reads as it should in hex
editor which is .z64 file format. lua script updated to print out the
game name from the in rom header.
NES updates:
flashing support for quite a few different mappers including GTROM,
MMC2, MMC4, action53, easyNSF, and other tweaks to rd/wr timings.
FIRMWARE UPDATES:
inlretro2.lua script now tries to poll the firmware "application
version" and suggest updating your firmware if you're not running the
version in this release. You can always update your firmware using the
bootloader method in the readme. But there is an easier method if you
have an stm32 based device (translated: you purchased your device in
2018 or later). AND you're already running firmware version v2.3.x
simply run the new scripts which were added in this commit:
PCB version 2.0 or 2.1 (large square PCB with option for 6 connectors)
>inlretro.exe -s scripts\inlretro_inl6fwupdate.lua
PCB version 2.0N (smaller PCB with NES connector only:
>inlretro.exe -s scripts\inlretro_inlNESfwupdate.lua
Now that it's easier for the host software to detect the firmware
application version can work towards having the scripts automatically
update the device firmware for you.. But still need to implement this..
included. Not making an offical firmware release, will have to upload to
INLretro6 with fwupdate call.
The colordream firmware updates are also included. But not the host
scripts, need to clean them up a bit.
cartridge reading!
have some cleanup to do:
clean up sega dumping so don't need a page0/1
implement sega single reads
Add GBA to some of the common opcodes
dumping Don't think need addrH |= of mapper, but maybe this is key to
cleaning up first note..
gba, sega, n64 has extra NOPs, remove and test.
create pinport renames for sega pins, move mask defines to pinport.h
clean up comments for genesis page reads..
haven't done anything with save ram/flash yet, but should be able to
dump rom for any/all GBA carts now! Tested with 8Mbyte Metroid Fusion.
Took ~75sec at 107KBps
Paul XPS