NES scripts to use new dump/flash methodology that MMC3 started.
Includes BNROM, UNROM, MMC1, and new scripts for FME7 & MMC4 (SOP flash).
Adding more general support to SNES with v2proto_hirom that script is
actually becoming more of a master script supporting both LoROM and
HiROM including flash, dump, and save backups.
SNES Rd/Wr now designate the state of /ROMSEL so have to manually
determine if access should be in /ROMSEL space of the SNES memory map or
not. (ie all SNES cart memories are /ROMSEL space except HiROM SRAM).
I made a commit earlier this week but messed things up by not pulling
from the master and things weren't updated... Here's the notes from
that commit:
Author: Paul XPS <paul@infiniteneslives.com>
Date: Tue Nov 6 22:45:52 2018 -0600
Large commit biggest feature add is NES MMC3 support including Save RAM
(aka WRAM/PRGRAM) support including dumping and writing save files.
The MMC3 script & method of dumping/flashing is the most forward
thinking script/firmware so far. Finally starting to form a clear
vision of how I want to handle flashing/dumping variations with mappers.
Biggest thing is having the host handle the mapper init & banking
control. In the view of the firmware, it's only responsible for knowing
how to flash a bank. And dumping is even more generic with the host
just telling what address range to read. Things will get more complex
with support of mappers with bus conflicts. But ready to start
converting these old hacked methods to be more like the MMC3 means.
Have some early support for dumping gameboy using the snes script as the
pinouts are nearly identical. Along with testing of toggling between 3v
GBA and 5v DMG.
Have some early support for INLretro NES only version which uses a
smaller mcu because it doesn't need to support large 16bit carts. Still
have to get this completed.
Added support for CNROM, but I'm not sure if it's actually working. Going
to restart with NROM and start updating the currently supported
mappers to be more like MMC3.
But this also includes some new updates from the second half of the week:
Started updating existing NES scripts to use new MMC3 methodology. Got
NROM, CNROM, BNROM, & Color Dreams working. On the host side only
needed to add nes.c functions for specific flash algos. Able to delete
significant amounts of mapper specific code from flash.c
Got some basic SNES script support with new methodology for Catskull
elect 5v PLCC SNES LoROM board. And INL SNES HI/LO-ROM 3v board as
well. These don't yet use buffer writes, just single byte writes.
Also having issues with Mirroring test/sensing again. Driving me crazy,
but don't really care about it at the moment and not sure what's wrong..
So just committing that broken for now. Looking to remove this
functionality from the firmware side as the host should be controlling
most of this.
Looking to add SNES RAM & buffered writes. Also need to test some of
the HIROM code as I just added it in there while I did the LOROM stuff..
Added windows driver package, just have to run InstallDriver.exe to
get drivers installed on windows 10 (and others I believe)
Created dictionaries for all remaining cart connectors.
Nothing useful there yet, just wanted to get the files created
and dictionaries working.
Added bunch of notes to shared_dictionaries to explain how to go
about creating new dictionaries and some opcode details.
Have STM8 cic communications working "CICCOM" to change between H/V
mirroring on new discrete boards. Currently these operations are handled
entirely from the host scripts and opcode/operands are mostly hard coded.
Need to move these to more generic functions in the ciccom dictionary
which will also speed things up moving to the firmware which will speed
things up.
Some changes to mapper 30 script to eat the ines header, and test CHR-RAM
banking.
Some updates to snes flashing operations, still a work in progress to
fully support prior SNES board designs.
Mostly adding support for mappers as I needed it for my own hardware
builds:
-MMC1
-mapper 30
-easy NSF (still need to update for mapper verilog fix)
-action53 (still need to update for mapper verilog fix)
-dual port board flashing
-colordreams, not sure if I actually got this working
-color ninja, just a special CPLD version of colordreams for ninja boards
Just started working on SNES code. slowly getting things up and working
outside of main inlretro.lua script similar to how NES has been handling
everything with it's own script. Able to flash v3 boards fine. v1 boards
flash without errors, but still having some mapping problems where it
verifies but won't boot. v2 prototype flashes most bytes but not all,
seems v2 boards are much slower to output valid data.. But that may just
be the manufacturer ID codes..?
TODO next:
-bootloader dictionary that jumps to bootloader so don't have to manually
close jumper on the board.
-turn on the watchdog timer for stm32
-create some sort of host timeout so reset button on programmer isn't as
useful
-allow firmware programing algos to be uploaded and executed from SRAM for
faster code that also doesn't require specific firmware builds to support
new mapers.
-Finish JTAG to simplify programing NES & SNES CPLDs
-Sort out swim issue with stm8s001 CICs
-add SWIM support for avr
Dumped/flashed MMX on SNES v3 boards.
created discrete_exp0_mapper_wr to try and write to mapper but not flash
for discrete boards but doesn't seem to work for some reason so commented
out for now.
Also the current build assumes that the mcu is able to over drive the
PRG-ROM output to select bank zero for initial bank table writting.
Seems to work, but may need to come up with write that applies to mapper
only and doesn't enable the PRG-ROM by keeping EXP0 low.
Need to work on having the scripts find the bank table.
Also added swim reading of stack bottom for CICOp signature.
Starting to add scripts for different mappers.
Need to clean things up quite a bit as everything was a bit of a hack just
so I could start building lizards and A53.
Need to add back NROM, and add UNROM as well.
Need to have program find bank table for itself both in the program and in
a cartridge.
Having problems with SWIM on new discrete NES boards for some reason.
Some boards are flakey and I march right in and start writting to config
bytes which will brick the device if communications are failing (and
there's no reset pin...) as is with the stm8s001
Realizing much of my problems with discrete boards on original kazzos was
that I completely ignored the fact that most discretes are subject to bus
conflicts. This makes writes to the mapper bank selecting uber flakey...
Created routine in bnrom.lua script to start flash operation by writing
the bank table to where Lizard puts it. Need to write routine to find the
bank table in a provided rom for flashing. And dumping needs to find the
bank table prior to making mapper writes and then use it for bank
switching!
Tested and working on AVR, stm adapter, and inl6
Lizard 512KB flash/dump:
AVR decrepit old firmware & app: 7.9KBps flash
AVR new firmware and app (this build) F:12.1KBps D:14.6KBps
STM adapter: F:31KBps D:114KBps
INL6: F:40KBps D:120KBps
Modified flash/dump scripts to be more generic accepting mapper/memory
args and file names. Then they only handle the buffer and file
operations.
Created scripts/nes folder for holding all mapper scripts. Currently only
nrom.lua is working and verified with inlretro6. Found issue where the
very first byte read from PRG-ROM was garbage. Narrowed it down to lower
address byte not settling in time, added NOP and resolved issue.
Still need to test on original kazzo and stm adapter, planning to do that
after this commit.
Next task is to get BNROM working so I can start getting to work on lizard
builds while taking advantage of speed boost!
Max
Paul XPS